MSDS - Lolli Cream Remover

** MATERIAL SAFETY DATA SHEET Finished Product**

SECTION 1 – SUBSTANCE & PRODUCT IDENTIFICATION

TRADE NAME: Eyelash Remover
CODE: Skin Care
FINISHED PRODUCT NAME: Lollipop Remover

SECTION II – COMPOSITION AND INGREDIENTS

H20, Propylene Carbonate

 

SECTION III – HAZARDS IDENTIFICATION

Skin: May cause skin irritation

Colorless liquid

Ingestion: May cause digestive tract disturbances. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.

Inhalation: May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigates. Chronic: No information found

SECTION IV – FIRST AID MEASURES


Eyes: Flush eyes with plenty of water

Skin: Flush skin with plenty of soap and water

Ingestion: If victim is conscious and alert, give 2 – 4 cupful’s of milk and water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.

Notes to Physician: Treat symptomatically and supportively. Antidote: None reported
V. FIRE FIGHTING MEASURES

General Information:

As in any fire, wear a self-contained breathing apparatus in pressure demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.

Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam or alcohol-resistant foam. Flash Point:
85 deg C (208.40 deg F)

 

** MATERIAL SAFETY DATA SHEET Finished Product**

SECTION VI - ACCIDENTAL RELEASE MEASURES

General Information: Use proper personal protective equipment as indicated in Section VIII

Spills/Leaks:

Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

SECTION VII - HANDLING AND STORAGE

Handling:

Keep away from heat, sparks and flame.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation.

Storage:

Keep container closed when not in use. Store in a cool, dry well-ventilated area away from incompatible substances. Keep containers tightly closed.

SECTION VIII - HANDLING AND STORAGE

Color
pH
Viscosity
Boiling Point
Solubility in water Specific Gravity/Density

SECTION XI - STABILITY AND REACTIVITY

Liquid Colorless Not available Not available 90degC Miscible 1.02 g/cm3

Chemical Stability:
Stable under normal temperatures and pressures.

Conditions to Avoid:
Incompatible materials, strong oxidarits.

Incompatibilities with Other Materials:
Strong oxidizing agents – strong acids – strong bases – strong reducing agents.

Hazardous Decomposition Products:
Carbon monoxide, Irritating and toxic fumes and gases, carbon dioxide.

Hazardous Polymerization: Has not been reported

** MATERIAL SAFETY DATA SHEET Finished Product**

 

SECTION XII - TOXICOLOGICAL INFORMATION

LD50/LC50:

Dermal, guinea pig; LD 50 => 5 gm/kg; Draize test
Rabbit skin: 400 uL Severe; Inhalation, rat: LC50 => 5100 mg/m3/4H Oral, mouse: LD50 => 1460mg/kg; Oral, rat: LD50 => 1540 mg/kg

Carcinogenicity: Butyrolactone

IARC: Group 3 carcinogen

DISCLAIMER:

The information and recommendations contained herein is based on data considered accurate and has been compiled from sources believed to be reliable and represent the most reasonable opinion on the subject when the MSDS was prepared. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is offered in good faith. Each user of this material needs to evaluate the conditions of use and design the appropriate protective mechanisms to prevent exposures, property damage or release to the environment. Lollipop iLashes assumes no responsibility for the personal injury or property damage caused by the material. Users assume all risks associated with the use of the material