MSDS - Lollipop Adhesive
** MATERIAL SAFETY DATA SHEET Finished Product**
SECTION I – SUBSTANCE & PRODUCT IDENTIFICATION
TRADE NAME: Lollipop Adhesive
FINISHED PRODUCT NAME: Lollipop iLashes Adhesive
DESCRIPTION
Designed for general purpose bonding on all types of substrates where gap filling is required.
SECTION II – COMPOSITION AND INGREDIENTS
INGREDIENT
Ethyl 2 – Cyanoacrylate 7085-85-0 85% ~ 90%
Poly Alkyl Methacrylate 9011-14-7 10%<
Pigment 0.1% ~ 0.5%
Methoxyethyl Cyanoacrylate 21982-43-4 5>0%>
Water N-Methyl Pyrrolidone
SECTION III – HAZARDS IDENTIFICATION
This Product is a colored, Solvent borne Cyano Methacrylate.
Inhalation: Vapor can cause headache, nausea and irritation of the nose, throat and lungs.
Eye Contact: Contact with vapor or liquid may irritate the eye.
Skin: Slightly irritating to the skin.
Ingestion: May cause pain, nausea and vomiting.
SECTION IV – FIRST AID MEASURES
EYE CONTACT
Immediately flush eyes with running water for at least 15 minutes. If redness, itching or a burning sensation develops, see a physician.
** MATERIAL SAFETY DATA SHEET Finished Product**
SKIN CONTACT
Remove contaminated clothing/shoes and wipe off excess from skin. Wash exposed area with soap and water. If redness, itching or a burning sensation develops, get medical attention.
INHALATION
Remove victim to fresh air and provide oxygen if breathing is difficult. Give artificial respiration if not breathing. Get medical attention immediately.
INGESTION
Get medical attention immediately.
NOTE TO PHYSICIANS
None for this material.
SECTION V – FIRE FIGHTING MEASURES
Extinguishing Media
Use dry chemical, carbon dioxide, foam or spray as appropriate for surrounding fire.
Fire Fighting Instructions
Do not enter any enclosed or confined fire space without full protective equipment, including self-contained breathing apparatus to protect against the hazardous effects of combustion products and oxygen deficiency.
SECTION VI - ACCIDENTAL RELEASE MEASURES
Procedures For Large & Small Spills/Leak Clean-Up
Dike and absorb with inert material such as sand and remove all liquid with the use of a vacuum system. If unable to remove liquid, then begin to absorb with sand, saw dust or commercial absorbent, and scoop up and place in containers for proper disposal. Keep spills and cleaning runoff out of the municipal sewers and open bodies of water. Decontaminate all clothing and the spill area with a detergent and large amount of water.
SECTION VII - HANDLING AND STORAGE
Handling Precautions
Avoid skin or eye contacts. Avoid prolonged or repeated breathing of vapors and mists. If spilled on clothing, launder before reuse. Do not take internally. Use only in a well ventilated area keep
** MATERIAL SAFETY DATA SHEET Finished Product**
out of the reach of children.
Storage Requirements
Keep from freezing. Product will coagulate. Keep container tightly closed when not in use. Do not get in eyes, on skin or on clothing. Monomer vapors can be evolved when materials is heated. Containers, even these that have been emptied, will retain product residue vapors and are subject to proper waste disposal as above.
SECTION VIII - EXPOSURE CONTROLS/PERSONAL PROTECTION
Protective Clothing/Equipment
The use of gloves impermeable to the specific material handled is advised to prevent skin contact and possible irritation. Use Chemical Goggles if splashing may occur.
** MATERIAL SAFETY DATA SHEET Finished Product**
SECTION IX - PHYSICAL AND CHEMCIAL PROPERTIES
PHYSICAL APPEARANCE: Liquid COLOR: Black BOILING POINT/RANGE: 100°C Ph: N/A WATER SOLUBILITY: N/A EXPLOSIVE LIMITS (VOL. %): N/A
SECTION X - STABILITY AND REACTIVITY
HAZARDOUS DECOMPOSITION PRODUCTS
Thermal decomposition may yield acrylic monomer, carbon monoxide and carbon dioxide. Unidentified organic compounds in fumes and smoke may be formed during combustion.
SECTION XI - TOXICOLOGICAL INFORMATION
Toxicity
Skin contact may cause burns. Bond skin rapidly and strongly. Skin and eye irritant.
Routes of Entry
Inhalation (Yes), Skin (Yes), Ingestion (Yes).
Carcinogen
See Section 3.
** MATERIAL SAFETY DATA SHEET Finished Product**
SECTION XII- ECOLOGICAL INFORMATION
Mobility and bioaccumulation potential, and degradation is expected in soil environment.
SECTION XIII - DISPOSAL CONSIDERATIONS
Dispose of unused product or contaminated product and materials used in cleaning up spills or leaks in a manner approved for this material. Consult appropriate federal, state and local regulatory agencies to ascertain proper disposal procedures.
SECTION XIV - TRANSPORT INFORMATION
Transport Restrictions:
IMDG CODE:
ADR/VLG:
UN NO:
Special Conditions For Transport And Storage: None
Not Restricted Not Restricted Not Restricted
SECTION XV - REGULATORY INFORMATION
EC Classification and User Label Information
Labeling (HMIS): Labeling E.C: Risk Phrases: TSCA (USA)
Health: 0 Flammability: 0 Reactivity: 0 None
Safety Phrases: 37
Ingredients listed in the TSCA inventory
CA Proportion 65: No California proposition 65 chemicals are known to be present.
SECTION XVI- OTHER INFORMATION
The information contained herein is based upon data and information available to us, and reflects our best professional judgment, but is offered without guarantee or warranty. This information is furnished upon the condition that the person receiving it shall make his own determination of the suitability of the material for his particular use.
** MATERIAL SAFETY DATA SHEET Finished Product**
DISCLAIMER:
The information and recommendations contained herein is based on data considered accurate and has been compiled from sources believed to be reliable and represent the most reasonable opinion on the subject when the MSDS was prepared. However, no warranty is expressed or implied regarding the accuracy of this data or the results to be obtained from the use thereof. It is not meant to be an all-inclusive document on worldwide hazard communication regulations. This information is offered in good faith. Each user of this material needs to evaluate the conditions of use and design the appropriate protective mechanisms to prevent exposures, property damage or release to the environment. It is the user’s responsibility to determine suitability for the product or of any production methods mentioned herein and adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the use thereof. Lollipop iLashes Inc. assumes no responsibility for the personal injury or property damage caused by the material. Users assume all risks associated with the use of the material. Lollipop iLashes Inc further specially disclaims all warranties of merchantability or fitness for a particular purpose arising from sale or use of this product.